Página 34 - CORTADORAS_Y_PONCHADORAS

Versión de HTML Básico

254
WIRE & CABLE TERMINATION
TRUSTED
SINCE
1862
USA
CANADA
INT’L
FAX
800.451.2632
FAX
800.524.2853
FAX
+1.815.397.9247
PHONE
800.435.0786
PHONE
866.384.8813
PHONE
+1.815.397.7070
K-Series Crimping Tool 8-1/0 AWG
cat. no.
upc no.
description
K05-1GL
02624 Crimping Tool
K05-1SPGL
02625 Crimping Tool, full cycle mechanism
02694
02694 Die Set
SPECIFICATIONS
Capacity
*
8 AWG – 1/0 AWG Copper
Length
15.4" (390 mm)
Weight
2.4 lbs. (1.1 kg)
K-Series Crimping Tool 8-4/0 AWG
SPECIFICATIONS
Capacity
*
8 AWG – 4/0 AWG Copper
Length
25.5" (650 mm)
Weight
6.4 lbs. (2.9 kg)
cat. no.
upc no. description
K09-2GL
02628 Crimping Tool
K09-2SPGL
02629 Crimping Tool, full cycle mechanism
02912
02912 Die Set
• Crimps smaller copper connectors.
• Small, light weight, easy to handle.
• Easy to get in tight locations.
• Color-coded, hexagonal rotating dies.
• Full cycle mechanism releases only after full crimp cycle is completed.
K-Series Crimping Tool 3/0-400
• Crimps the larger copper connector sizes all the way to 400 kcmil (MCM).
• Color-coded, hexagonal rotating dies.
cat. no.
upc no.
description
K09-3GL
02630 Crimping Tool
02913
02913 Die Set
SPECIFICATIONS
Capacity
*
3/0 AWG – 400 kcmil (MCM) Copper
Length
25.5" (650 mm)
Weight
6.4 lbs. (2.6 kg)
Manual Crimping Tool
• Designed for crimping a wide range of overhead service entrance connections,
overhead splices, and overhead taps.
• Easy-to-use MD-6 type “pop” tool.
• K425 tools are equipped with D
³
die groove and either “BG” or “O” die groove.
• K425K tools are equipped with a die groove for Kearney
®
“O” dies and either
a 5/8" or “O” die groove
• The D
³
die groove serves as a die seat for all Greenlee KD6 and industry
“W” type dies. Page 259.
• Bent fiberglass handles provide a solid grip, good leverage and better durability than
wood.
• Teflon-impregnated bushings at pivot joints provide smooth operation and long life.
• Complete crimps are assured with an over-center cam mechanism.
• Tool can easily be checked visually for proper adjustment and can be
adjusted with Allen wrenches.
cat. no.
upc no.
description
K425O
02064 Crimping Tool with D
³
and O die grooves
K425BG 02065 Crimping Tool with D
³
and BG die grooves
K425K58 08160 Crimping Tool with Kearney
®
Oand
5/8 die grooves
K425KO 08161 Crimping Tool with Kearney
®
Dand
O die grooves
SPECIFICATIONS
Capacity
*
See capacity chart on page 245
Crimping Force
9,000 lb. (40 kN)
Length
25-3/8" (645 mm)
Weight
7.1 lbs. (3.2 kg)
• Crimps all the popular small to mid-range copper connector sizes.
• Long length results in low handle efforts.
• Color-coded, hexagonal rotating dies.
• Full cycle mechanism releases only after full crimp cycle is completed.
K425BG
*UL and cUL classified with Anderson, Blackburn, Burndy, ILSCO, Panduit, Thomas & Betts and Penn-Union copper connectors.
The products listed above are registered trademarks of Anderson
®
, Blackburn
®
, FCI Burndy
®
, ILSCO
®
, Panduit
®
, Penn-Union
®
and Thomas & Betts
®
.
*UL and cUL classified with Anderson, Blackburn, Burndy, ILSCO, Panduit, Thomas & Betts and Penn-Union copper connectors.
The products listed above are registered trademarks of Anderson
®
, Blackburn
®
, FCI Burndy
®
, ILSCO
®
, Panduit
®
, Penn-Union
®
and Thomas & Betts
®
.
*UL classified and CSA certified with Anderson, Blackburn, Burndy, ILSCO, Panduit, Thomas & Betts and Penn-Union copper connectors.
The products listed above are registered trademarks of Anderson
®
, Blackburn
®
, FCI Burndy
®
, ILSCO
®
, Panduit
®
, Penn-Union
®
and Thomas & Betts
®
.