Página 23 - HERRAMIENTA_PARA_JALAR_CABLES

Versión de HTML Básico

211
USA
CANADA
INT’L
FAX
800.451.2632
FAX
800.524.2853
FAX
+1.815.397.9247
PHONE
800.435.0786
PHONE
866.384.8813
PHONE
+1.815.397.7070
www.greenlee.com
= new product
= Replacement Part
= Accessory
B
= Bare tool
Set Screw Clamp Pulling Grips
• Use to pull in 2" (50.8 mm) or larger conduit.
• Type of pulls: heavy, long runs. (629)
• Type of pull: light and medium. (504)
• Type of grip: Flexible eye 1/4" (6.4 mm-629) (6.3 mm-504) diameter
galvanized steel aircraft cable connected to 2 cable receptacles with 5/8"
(15.9 mm) diameter opening and 2 clamping set screws.
• Select pulling grips with a maximum-rated capacity that meets or ­exceeds
the cable puller’s maximum pulling force.
• Minimum cable diameter is 3/8".
Each grip has two opposed set screws that provide positive locking. Openings in wire
grip should be 50% filled with wire to assure slip-proof grip.
624L
504
Cable Preparation Instructions for Set Screw Clamp-Type Pulling Grips
Strip cable approximately 3" (76 mm) of insulation off the end of the cable
to be pulled.
NOTE:
The grip head should not be more than 60% filled nor
less than 40% filled to assure that the set screw does not ­project above the
surface of the grip body when the set screws are tightened down.
The central core should be clipped away and the outer strands used in the
grip head.
Using the Allen Wrench provided, back out the set screws far enough to
accommodate the stripped cables.
Insert the bare wire strands into the grip head as far as they will go.
Tighten both set screws in each grip securely against the ­conductors.
CAUTION:
If the set screws extend above the surface of the gripping head,
damage to the conduit could result. To prevent this,
wrap the head with electrical tape.
Specifications
Capacity
1,750 lbs. (7.7 kN)
Weight
1.2 lbs. (.5 kg)
Size
Receptacle - 5/8" (15.9 mm)
SPECIFICATIONS
MaximumRated Capacity
Weight
504 – 1750 lbs. (28.9 kN)
504 – 5 lbs. (2.3 kg)
629 – 6,500 lbs. (28.9 kN)
629 – 5 lbs. (2.3 kg)
624 – 6,500 lbs. (28.9 kN)
624 – 3.5 lbs. (1.5 kg)
624S – 3,250 lbs. (14.5 kN)
624S – 2 lbs. (.9 kg)
624L – 3,250 lbs. (14.5 kN)
624L – 2.1 lbs. (1 kg)
624S
Cat. No.
UPC No.
Description
504
23665 Set Screw Clamp-Type Pulling Grip
629
31855 Pulling Grip with Clevis includes 624S, 624L and 678 clevis -
4 clamp
624
31908 Pulling Grip includes 624S and 624L - 2 clamp each
624S
31866 Short Pulling Grip - 2 Clamp
624L
31867 Long Pulling Grip - 2 Clamp
51208
51208 Grip Allen Wrench
52352
52352 Grip Set Screw (2 per clamp), 629 and 624 - 8 for each grip 624L
and 624S - 4 for each grip.