Página 28 - HERRAMIENTA_PARA_JALAR_CABLES

Versión de HTML Básico

216
CABLE PULLING
TRUSTED
SINCE
1862
USA
CANADA
INT’L
FAX
800.451.2632
FAX
800.524.2853
FAX
+1.815.397.9247
PHONE
800.435.0786
PHONE
866.384.8813
PHONE
+1.815.397.7070
CABLE PULLING LUBRICANTS
UG5 Ultra GLIDER
Cable Pulling Lubrication System
• Applies lube more evenly around the cable and more consistently
than can be done by hand. This reduces the force required by the
cable puller and reduces the chance for damage to the cable.
• During a cable pull, the person feeding the cable usually can also
operate the Ultra GLIDER
, which reduces the need for one person
on the job.
• Eliminates the need for a person to place their hands near the point
where the cable enters the conduit or duct.
• Eliminates the mess and slippery surfaces associated with manual
cable lubrication.
• Applicators clean easily with water. Power unit and hose do not
require cleaning between jobs.
• 3 pump speeds make it easy to match the lube rate to the needs of
the pull.
The Greenlee UG5 Ultra Glider
is the “new way” to effectively apply
cable lube during cable installation. The Ultra GLIDER
has several
advantages over the manual method used by most contractors today.
Cat. No.
UPC No.
Description
UG511S
10353
ULTRA-GLIDER 120V with UGSAK slip-in applicator
kit
UG511T
10355
ULTRA-GLIDER 120V with UGTAK threaded applica-
tor kit
UG511ST 10356
ULTRA-GLIDER 120V including slip-in applicator kit
UGSAK & threaded applicator kit UGTAK
UG512S 10357
ULTRA-GLIDER 12V with UGSAK slip-in applicator kit
UG512T
10359
ULTRA-GLIDER 12V with UGTAK threaded applicator
kit
UG512ST 10360
ULTRA-GLIDER 12V including slip-in applicator kit
UGSAK & threaded applicator kit UGTAK
UG511
10354
ULTRA-GLIDER 120V ASSEMBLY without applicators
UG512
10358
ULTRA-GLIDER 12V ASSEMBLY without applicators
UGSAK
10252
Slip-In Applicator Kit (Includes 2", 2-1/2", 3", 3-1/2"
and 4" applicators with case)
UGTAK
10253
Threaded Applicator Kit (Includes 2", 2-1/2", 3",
3-1/2" and 4" applicators with case)
UGSA150 10287
1-1/2" Slip-In Applicator Assembly
UGSA200 10289
2" Slip-In Applicator Assembly
UGSA250 10291
2-1/2" Slip-In Applicator Assembly
UGSA300 10293
3" Slip-In Applicator Assembly
UGSA350 10295
3-1/2" Slip-In Applicator Assembly
UGSA400 10297
4" Slip-In Applicator Assembly
UGSA500 10304
5" Slip-In Applicator Assembly
UGSA600 10311
6" Slip-In Applicator Assembly
UGTA075 10284 3/4" Threaded Applicator Assembly
UGTA100 10285 1" Threaded Applicator Assembly
UGTA125 10286 1-1/4" Threaded Applicator Assembly
UGTA150 10278 1-1/2" Threaded Applicator Assembly
UGTA200 10279 2" Threaded Applicator Assembly
UGTA250 10280 2-1/2" Threaded Applicator Assembly
UGTA300 10281 3" Threaded Applicator Assembly
UGTA350 10282 3-1/2" Threaded Applicator Assembly
UGTA400 10283 4" Threaded Applicator Assembly
12656
12656
20' Extension Hose (Maximum extension is 20')
Specifications
Dimensions
Depth: 17" (0.43 m)
Width: 18" (0.45 mm)
Height: 39" (1 mm)
Weight
24 lbs. (11 kg)
Wheel Diameter
8" (20 cm)
Hose length
10' (3 m)
Battery (12V unit only)
Type: Sealed lead acid rechargeable battery
DC output: 12-Volt
Weight: 14.5 lbs. (6.6kg)
Battery Life: Three to four 5 gallon buckets per charge
Motor (120V unit only)
AC output: 120-Volt
Amps: 6 Amps