Página 7 - POWER_TOOLS

Versión de HTML Básico

147
USA
CANADA
INT’L
FAX
800.451.2632
FAX
800.524.2853
FAX
+1.815.397.9247
PHONE
800.435.0786
PHONE
866.384.8813
PHONE
+1.815.397.7070
www.greenlee.com
= new product
= Replacement Part
= Accessory
B
= Bare tool
LRH-288 Electrician’s 3/4" SDS-plus Rotary Hammer
• Lightweight: 8.4 lbs. (3.81 kg)
• IP-56: Keeps out dust and water
• High capacity battery: 28.8V LI-ION
• Hammering force: 5,300 lbF
• Two speed hammering selection:
High: 0-4,500 bpm, Low: 0-2,800 bpm
• SDS-plus bit system
• Magnesium gear case provides long gear life and heat dispersion
• Ergonomic soft rubber grip for stress reduction
• Electronic performance monitoring system provides longer battery life
• Dust-proof switch ensures long life
This is one tough rotary hammer. With its magnesium gear case housing that
provides excellent heat dispersal and its cooling fan that flows air around
the gear case, it is capable of drilling up to 9/16" diameter holes in concrete
continuously. Also, the large cooling fan provides enough air flow to prevent
tool-killing dust buildup, and the two-finger trigger is sealed to prevent dust
entry. Use the Soft hammer selection for holes up to 3/16" diameter and the
Hard hammer selection for holes from 3/16" through 3/4" diameter.
Rigorous continuous use is made possible by air flowing through
the space between the gear case and the main unit housing. Which,
similar to a radiator, cools the entire gear case containing the hammer
and gears which become hot from use. A large cooling fan drives the
exhaust system to prevent dust buildup.
The gear case is made from magnesium, which is light and
excellent for dispersing heat. The hammer and gears are
covered to prevent fine particles of dust from entering the tool
and grease from leaking.
Cooling/dust-proof design supports
continuous use.
Large cooling fan
Built-in motor
Air Intake
Emission
Magnesium
metal gear
case
Intertek
3193286
Includes:
(1) 28.8V Rotary Hammer, (2) 28.8V Lithium-Ion Compact
Batteries, (1) 14.4V – 28.8V Battery Charger, (1) Carrying Case,
(1) Shoulder Strap
Cat No.
UPC Description
LRH-288
95939 Rotary Hammer Kit - 28.8V
LBC-81B
95945 Battery Charger - 7.2-28.8V (Pt)
LBP-288
95944 Li-Ion Battery - 28.8V (Pt)
SPECIFICATIONS
Battery
28.8 V Lithium-Ion
Charging Time
55 min Usable, 70 min Full
Shank
3/8" SDS-plus
Speed
0 - 920 RPM High, 0 - 500 RPM Low
Hammering Speed
0 - 4500 BPM High, 0 - 2800 BPM Low
Hammering Force
5300 LBF
Application
For Holes Up To 1" Diameter