Página 112 - abchance

Versión de HTML Básico

Conduc tor Suppor t Equuipment – 2200
Page 2208
September 2012
Phone: 573-682-5521 Email: hpsliterature@hubbell.com Web: hubbellpowersystems.com
Aluminum Base
Features & Applications
• For use where working space on pole is limited
• Also used on H-frame or heavy suspension
insulator construction for raising or lowering
conductors with wire tongs
• Lever Lift should be used in place of Wire Tong
Saddles when loads exceed 500 lbs.
• Wire tong is attached to the Single Type by
simply removing the cotter key
• Next, slide the shaft to the side, placing the butt
ring of the tong into the fork
• Next, shoot the shaft through, and replace the
cotter key
• For the Double Type, remove the wing nuts, slip
butt rings of the two wire tongs on the shaft
extensions and replace wing nuts
• High-strength aluminum alloy Lever Lifts are
lightweight and easy to handle
• Provide a total conductor lift of 20
3
4
inches, and
will support any size of wire tong
• When two Lever Lifts are required, one at each
side of the pole, they can be attached at virtually
the same height
• An arbor adapter is available to convert the
Single Type Lever Lift to a Double Type
• Each Lever Lift is equipped with a clevis for
attaching rope blocks
• The clevis, used at the end of the Lever Lift for
attaching the lower rope blocks, will rotate
on the same pin that holds the wire tong(s),
permitting freedom of movement
Catalog
No.
  M4760W
  M47601W
  M47602
Weight
14
1
/
2
lb./
 6.5 kg.
15
1
/
2
lb./
 7.0 kg.
 1
3
/
4
lb./
  .8 kg.
Description
Single Type
Lever Lift
Double Type
Lever Lift
Arbor Adapter
Working
Load
Per Tong
1000 lb.
 750 lb.
Double Type
M4760W
C4001016
Epoxiglas
®
Base
Features & Applications
• For same applications as aluminum-base units
• Normally used on higher transmission voltages
where more lifting space is required
• Has a total conductor lift of 36”
• Arbor adapter (M47602) shown above can be
used to convert an Epoxiglas lever lift into a
double lift for two wire tongs
• Epoxiglas member is 36" long and provides the
same working load per tong as the aluminum
units
Lever-Lift Wire Tong Support
Weight
18 lb./8.1 kg.
Working
Load
per Tong
1000 lb.
Description
Epoxiglas Lever Lift
Catalog No.
C4001016
M47602