Página 170 - abchance

Versión de HTML Básico

Cover -Up Equipment – 2400
Page 2406
November 2012
Phone: 573-682-5521 Email: hpsliterature@hubbell.com Web: hubbellpowersystems.com
46kV Post Insulator Cover
25kV Post Insulator Cover
C4060091
C4060092
3
1
/
2
lb./1.6 kg.
3
lb./1.4 kg.
Post Insulator Covers  —  46 kV Ø-Ø & 25 kV Ø-Ø
• Tested to ASTM F712
• Made of high-impact orange ABS plastic
• Split on each side forms a passage for the conductor
• Bottom portion of T-shape covers the insulator skirts
• Horizontal portion covers the conductor and hardware
• Horizontal portion is flared at each end to interlock with Chance 36.6 or
46kV spiral conductor covers (see page 2407)
• Larger cover may be used on vertical and horizontal 46kV tie top and
clamp top post insulators and Epoxirod® standoffs, pole tops and bi-unit
assemblies
• Not for rubber glove installation above 34.5 kV
C4060102
Crossarm End Cover
2
1
/
2
lb./1.1 kg.
Crossarm End Cover  —  36.6 kV Ø-Ø
• Tested to ASTM F712
• Covers crossarm end to help prevent tie wires from contacting crossarm
during tying/untying
• Helps prevent lineman from contacting a ground potential while in
contact with conductor
• Fits over crossarm end up to 5” x 6” with either pin- or post-type
insulator
• Made of ABS orange plastic
• Slots may be cut in each side to provide passage for double-arming bolts
Catalog No.
C4060097
Description
Pole Top Cover
Weight
2
1
/
2
lb./1.1 kg.
Pole Top Cover  —  36.6 kV Ø-Ø
• Tested to ASTM F712
• Made of high-impact orange ABS plastic
• Helps prevent tie wires from contacting pole when tying/untying ridge
construction
• Fits a pole top of up to 10” dia. with single- or double-ridge pin
construction
• Maximum bolt length is 16”
• Rests on pole top, covering 10-1/2” of the pole top and 4-1/2”of ridge pin
• By using the elastic cord furnished with cover, cover-up can be butted
against insulator to cover ridge pin and pole top
C4060097
C4060102
Insulator, Hardware, and Crossarm Covers
C4060091
Substation and Underground Barriers
Features & Applications
• Tested to ASTM F712
• Same excellent quality bright-orange linear
polyethylene material as used in many pieces of Chance
cover-up equipment
• Available in 4’ x 6’ sheets for use in substations and as
underground barriers
• Cutting smaller pieces is accomplished with any hand or
power saw
• Form the sheets with a blow torch or in an oven heated
to 250°F
• Although sheet becomes increasingly stiff as
temperatures drop, it does not become brittle and
break at -50°F
• Will not soften or deform at 170°F
• Material will not flash flame
• Puncture strength is 300 volts per mil.
Weight
30 lb./13.5 kg.
Description
4 feet x 6 feet x 0.255"
Catalog No.
C4060002