Página 176 - abchance

Versión de HTML Básico

Cover -Up Equipment – 2400
Page 2412
November 2012
Phone: 573-682-5521 Email: hpsliterature@hubbell.com Web: hubbellpowersystems.com
Ordering Information
Meets ASTM Standard Specification D 1050
for Type III — Ozone Resistant
Class 4, Proof Tested at 40 kV AC rms
Maximum Use, Phase-to-Phase: 36 kV
Low Weight, High Performance
• As much as 25% lighter in weight than other Class 4
flexible cover-up
• Helps protect workers from accidental contact with
conductors
• In accordance with ASTM D 1050-90, Chance ozone/
corona-resistant thermoplastic elastomer offers
excellent performance properties
• Retains high-visibility orange color
• Special formulation exhibits superior resistance to long-
term aging/checking
• Does not absorb water
• Dielectric cover-up system consists of a separate coupler
and three hose lengths
• This permits hoses to join to cover straight runs or to
flex to fit contours at bends and angles
• Shorter sections may be cut on site from standard
lengths to custom-fit taps, jumpers and like wires
Long lips provide flashover distance to permit use on
systems through 36 kV phase-to-phase.
Interchangeable
with other brands
of extended-lip
hose, Chance Class
4 flexible cover-up
joins with separate
coupler.
Parallel grooves inside the coupler match and grip the
28 serrations (
1
4
" each) in Class 4 hose ribs. All serrated
sections on Class 4 hose measure 7 inches long. Coupler
overlaps 5
1
4
inches onto hose when engaged.
Catalog No.
C4060341
C4060342
C4060343
Coupler also can join sections Chance 1
1
2
"-diameter
short-lip Class 3 hose for 26.5 kV phase-to-phase
maximum use.
Easy To Handle And Place
• Rubber gloves or hot-line tools may be used to apply
Chance Class 4 Line Hose
• Lightweight, balanced material composition adds
pliability
• Easy to put on, couple, relocate and remove, even
when wearing leather protectors over rubber gloves
• Outer lip peels back with ease to open and start onto a
conductor from either end
• With a push at the other end, full length slides on as
lips zip closed around conductor
• So hose can insert into coupler, Chance bevel-cuts the
serrations on the side ribs
• Vertical serrations resist withdrawal from the coupler
• Two or more coupled sections stay joined when drawn
along on the conductor and positioned as a unit
• Rubber-like material slides readily by hand yet resists
creep or slippage when placed
• To remove each piece, open one end and strip
remainder off conductor
For installation by hot-line tools, design provides a flat
area debossed full length to accept special applicator
tools (see Catalog Section 2100).
Extended-Lip Flexible Line Hose
36 kV, Class 4, 1
1
2
"-diameter
Coupler
10
1
/
2
inches
C4060340
1
1
/
2
lb./0.7 kg.
Hose — Style C - Plain, Both ends — 1
1
/
2
" I.D.
Length
3 feet
4
1
/
2
feet
6 feet
Weight
4
1
/
2
lb./2 kg.
6
3
/
4
lb./3 kg.
9 lb./4 kg.