Página 237 - abchance

Versión de HTML Básico

L ineman' s Accessor ies – 2550
Phone: 573-682-5521 Email: hpsliterature@hubbell.com Web: hubbellpowersystems.com
Page 2555
September 2012
Never carry wire, tools, or anything other than
the “positioning” strap in the D-rings of a tool
belt. Foreign objects carried in the D-rings may
cause the snap to malfunction, and accidental
disengagement to occur.
WARNING
!
Linemen’s Tool Belts
• Field-tested, proven design
• One of the original semi-floating, shifting “D” belts
• Shifting “D”s reduce chafing and bumps on hips
• 5" cushion pad is soft and breaks in easily
• Harness leather tool loops and tongue andbuckle section
are designed for rugged use
No. PSC60FHDXX
Ship Wt: 6.25 lb (2.83 kg)
The Bashlin Deluxe
“D”size
Ordering Bashlin Tool Belts
Sizing
• Proper sizing of lineman’s tool belt is critical
• Improperly sized belt is uncomfortable and may cause
an accident or injury
• Bashlin tools belts are measured by the “D” size
• This is the distance between the heels of the D-rings
• All linemen’s tool belts must be ordered according to
the “D” size
Sizing
• Locate the point where the heel of the “D” ring
should rest
• As the photo illustrates, this is approximately 4"
down from top of hip bone
• Begin to measure from this point
• Measure around buttocks to same point on opposite
side
• When a properly sized tool belt is worn, D-rings will
point nearly straight ahead
• Tongue adjustment will also be in center holes as
shown in Photo 3
• To properly size Padded Rest-A-Back tool belts, add
2" to your standard “D” measurement
BELT ADJUSTMENT IN INCHES - PER ASTM F887
3
1
2
   D Size,      Minimum,   Center      Maximum,       Tool
   inches         inches     Hole           inches          Loops
  D18     32
36                40                   3
  D19     33
37                41                   3
  D20     34
38                42                   3
  D21     36
40                44                   4
  D22     37
41                45                   4
  D23     38
42                46                   4
  D24     40
44                48                   4
  D25     41
45                49                   4
  D26     42
46                50                   4
  D27     44
48                52                   4
  D28     45
49                53                   4
Falls can cause serious injury or death.
WARNING
!
All linemen’s tool beltsmust beorderedaccording to “D” size.
Example: PSC60FHD21 See how and table above.
(continued, next page)