Página 240 - abchance

Versión de HTML Básico

L ineman' s Accessor ies – 2550
Page 2558
September 2012
Phone: 573-682-5521 Email: hpsliterature@hubbell.com Web: hubbellpowersystems.com
PS683XAP
PS647TDS
Bashlin harnesses must be sized and adjusted
properly to function properly.
CAUTION
!
Connection to the front loop of the PS683XAP
harness can be made with carabiners or by
looping web or rope through the eye. Snaphooks
that may cut the material are not to be used.
CAUTION
!
Features & Applications
• Bashlin harnesses are normally made from 10,000 lb.
test woven nylon web
• Webbing is in contrasting colors (usually orange on the
torso and black on the legs) for easier donning
• Meet or exceed all appropriate ANSI, ASTM, and OSHA
requirements
• Hardware features a corrosion-resistant coating
• Splices are lock stitched with nylon thread of a
contrasting color for easy inspection
• Each standard harness is tagged per ANSI/ASTM
requirements with labels shown
Full Body Harnesses
Sizing
• Bashlin harness is sized according to torso of the
individual
• This involves measuring height and chest, then finding
correct size on chart, according to harness style
• Height is first consideration
• Move to larger size if chest measurement is too large
for corresponding height
• If chest measurement is too small for corresponding
height, choose size dictated by height
1. The user must be properly trained prior to using
Bashlin products.
2. Use the proper product for the job.
3. Inspect the harness before each use.
4. Wear the harness tight. It must be tight enough
that the buckles hold the material properly and will
not disengage accidentally. If the harness is loose, the
material can hook on items in the work area, or in the
worst case will not perform properly in the event of an
arrested fall.
5. Check the buckles, and tighten the straps each time
before going aloft.
6. Store the harness properly in a storage bag for
longer wear.
WARNING
!
Features & Applications
• Bashlin’s newest tower harness
• For climbing and suspension applications
• Has leather lining on waist and seat strap
• Back pad is 6" wide
• Waist belt uses grommet-style closure
• Please state size: S, M, L, XL
PS647TDS Tower Harness
No. PS647TDS_ _
Tower Harness
with back and shoulders D rings Ship Wt: 8 lb (3.63 kg)
Features & Applications
• “X”-style harness is available with the 656CM tool belt
• Belt can be easily removed from harness when not
needed
• Features front attachment point for work positioning
on ladders or rescue
• Please state size, and belt “D” size
PS683XAP ClimbingHarness
No. PS683XAP_ _
Climbing Harness with a 3" nylon loop for
lanyard in back
Ship Wt: 8 lb (3.65 kg)
Height
5'4" - 5'7"
5'8" - 5'11"
6' - 6'3"
6'4" - 6'6"
6'6"+
6'6"+
Chest
34" - 36"
36" - 40"
42" - 44"
46" - 48"
48" - 52"
52"+
Size
"S" Small
"M" Medium
"L" Large
"XL" Extra Large
"2X" Double Extra Large
"3X" Triple Extra Large
Height
5'4" - 5'7"
5'8" - 5'11"
6' - 6'3"
6'3"+
Chest
28" - 38"
38" - 48"
48" - 58"
58"+
Size
"S" Small
"M" Medium
"L" Large
"XL" Extra Large
Example: PS
647TDSXL (= Extra Large)
Example: PS
683XAPL (= Large)