Página 307 - abchance

Versión de HTML Básico

Chance grounding ferrules and cable meet
requirements of ASTM F 855; see table, page 3002.
Grounding Equipment – 3000
Phone: 573-682-5521 Email: hpsliterature@hubbell.com Web: hubbellpowersystems.com
Page 3019
July 2012
Copper Grounding Cable
Either aluminum or copper ferrules may be used with copper
cable.
• Extra-flexible for handling ease yet strong and tough
for long wear
• Jacketing is smooth, abrasion, weather and oil resistant
• In accordance with applicable ASTM Specifications,
marked with AWG size approximately every 4 feet
• Yellow and black jackets are T-prene rubber compound
with -20°F recommended low temperature
• Clear jackets (which allow visual inspection of strand
conditions) are ultraviolet-inhibited Poly Vinyl Chloride
(PVC)
• Recommended low temperature for PVC-jacketed cable
is 0°F
• Extra-flexible cables, because of their extra-fine strands
• Require termination ferrules when used with ground
clamps
Selection Criteria
• Shrouded ferrules overlap onto the grounding cable
jacket for stress relief to the terminal. Two crimps
secure the ferrule against the bare strands and one
crimp applies on the jacket
• Unshrouded ferrules are available with shrink tubing
that overlaps the bare cable conductor and jacket for
stress relief
• Available either factory-installed in pairs on any cable
length specified or as separate individual units, the
ferrules install simply with a hydraulic crimping tool.
Complete illustrated installation instructions come with
the ferrules and include a table for the crimping die
sizes to use
See ordering tables for crimping-die sizes applicable.
Grounding Ferrules
Unshrouded ferrules
Shrouded ferrules
Cable
Sect. B Cable
Section A
Plain-plug type f
or pressure-type grounding-clamp terminals
Copper ferrules
Threaded-stud type f
or tapped or drilled grounding-clamp terminals
Threaded-stud type f
or tapped or drilled grounding-clamp terminals
Anderson die-less VERSA-CRIMP
compression tools require no dies and are capable of making these crimped connections. If using
another crimp tool brand, contact that manufacturer for Burndy die equivalents.
Tin-Plated Copper ferrules
Plain-plug type f
or pressure-type grounding-clamp terminals
Catalog
Number
Size
AWG Strands* Diameter
(Inches)
Approx. O.D.
(Inches)
Approx. Wt.
(lb./1,000 ft.)
Yellow-Jacket Copper Cable
S6116
#2
665
0.32
0.55
280
S6117 “1/0” 1045
0.41
0.66
425
S6118 “2/0” 1330
0.47
0.73
520
S6119 “4/0” 2109
0.59
0.87
760
Clear-Jacket Copper Cable
S6449
#2
665
0.344
0.53
289
S7568 “1/0” 1050
0.445
0.63
520
S6450 “2/0” 1323
0.487
0.70
546
S6451 “4/0” 2107
0.616
0.84
841
Black-Jacket Copper Cable
S3713
#2
665
0.32
0.55
280
S3715 “1/0” 1045
0.41
0.66
425
S3712 “2/0” 1330
0.47
0.73
510
S3714 “4/0” 2109
0.59
0.87
760
*Varies with manufacturer.
Shrouded plain copper ferrules
1 unit each,
not installed
Catalog No.
Burndy Die No.†
or equivalent
Cable
Size,
AWG
Sect. A Sect. B
C6002630
U165
U166
#2
C6002631
U165
U168
“1/0”
C6002632
U165
U-L
“2/0”
C6002633
U166
U-L
“4/0”
Unshrouded plain copper ferrules
1 unit each,
not installed
Catalog No.
Burndy Die No.†
or equivalent
Cable
Size,
AWG
C6002614
U165
#2
C6002615
U165
“1/0”
C6002616
U165
“2/0”
C6002617
U166
“4/0”
Shrouded threaded copper ferrules
C6002622
U165
U166
#2
C6002623
U165
U168
“1/0”
C6002624
U165
U-L
“2/0”
C6002625
U166
U-L
“4/0”
Unshrouded threaded copper ferrules
C6002606
U165
#2
C6002607
U165
“1/0”
C6002608
U165
“2/0”
C6002609
U166
“4/0”
Shrouded plain tin-plated copper ferrules
C6003119
U165
U166
#2
C6003120
U165
U168
“1/0”
C6003121
U165
U-L
“2/0”
C6003122
U166
U-L
“4/0”
Unshrouded plain tin-plated copper ferrules
C6003111
U165
#2
C6003112
U165
“1/0”
C6003113
U165
“2/0”
C6003114
U166
“4/0”
Shrouded threaded tin-plated copper ferrules
C6003115
U165
U166
#2
C6003116
U165
U168
“1/0”
C6003117
U165
U-L
“2/0”
C6003118
U166
U-L
“4/0”
Unshrouded threaded tin-plated copper ferrules
C6003107
U165
#2
C6003108
U165
“1/0”
C6003109
U165
“2/0”
C6003110
U166
“4/0”
Two crimps