Página 327 - abchance

Versión de HTML Básico

Truck Accessor ies – 4150
Phone: 573-682-5521 Email: hpsliterature@hubbell.com Web: hubbellpowersystems.com
Page 4157
September 2012
Features & Applications
• Drains off capacitance or static charges from winch
trucks and aerial devices
• This grounding method should not be considered
adequate protection for personnel against conductor
contact
Screw Ground Rod
(Catalog No. G3370)
When installed, 6’ copper-clad rod develops less
resistance than straight ground rods. Helix (spiral
section), T-handle and wingnut are bronze for high
conductivity
Flat Face Ground Clamp
(Catalog No. T6001798)
For secure attachment to the truck bed at an area
cleaned for electrical contact, clamp features bronze
T-handle, aluminum body and serrated jaws with range
for 1/8" to 1-1/2" angles or flats. Ratings: 400 amps
continuous current; 25,000 amps fault current for 15
cycles and 30 cycles
C-Type Ground Clamp
(Catalog No. C6001754)
For connection to vertical shaft of ground rod, clamp
features smooth jaws and bronze eyescrew. Ratings: 350
amps continuous current; 28,000 amps fault current for
15 cycles and 20,000 amps fault current for 30 cycles
Grounding Cable and Ferrules
(Catalog No. S6116 & C6002618)
For easy handling, extra-flexible #2 copper cable
features fine stranding and tough yellow T-prene rubber
compound jacket for all-temperature uses down to
-20°F. Cable length is 50 feet. Two shrouded aluminum
ferrules come factory-installed on the cable to secure the
threaded studs in the clamp terminals
Catalog No.
T6001971
ORDERING INFORMATION
Description
Truck Grounding Set
Weight
35 lb./15.75 kg.
Storage Reel
(Catalog No. C4176086)
To help keep ground set clean and ready for use, reel
features tubular-steel frame which can be bolted to
deck. Reel is for storage only. Cable and clamps must be
removed completely from reel before use. Failure to do
so could result in a dangerous voltage drop and violent
mechanical reactions. A label on the unit gives this
warning.
Truck Grounding Set
Swivel Wireholder Jib Extensions
for Telelect trucks*
3" Heavy Wall Epoxiglas
®
Pole with 31" of
clear glass (minimum).
Catalog No.
PST4002818
PST4002819
PST4002820
PST4002821
ORDERING INFORMATION
Fits Jib Size
4" x 4"
3
3
/
8
" x 5"
3" Round
4
1
/
2
" Round
Weight
28 lb. / 12.72 kg.
29 lb. / 13.2 kg.
27 lb. / 12.3 kg.
28 lb. / 12.72 kg.
Features & Applications
• Feature a Large Swivel-Type Roller Wireholder with
2-1⁄2" x 3-3⁄8" opening mounted on 3" dia. orange
Epoxiglas
®
jib extension
• Tested per ASTM F711 and OSHA
*To fit other brands of trucks, contact Hubbell Power Systems with detailed specifications.
Jib Extension Rated Working Load: 300 lb.