Página 42 - abchance

Versión de HTML Básico

Gins and Booms – 1200
Page 1202
September 2012
Phone: 573-682-5521 Email: hpsliterature@hubbell.com Web: hubbellpowersystems.com
Safety Considerations
• A swivel-hook block should always be used in the eye
of the gin and a sheave or capstan near the bottom of
the structure should be used to thread handline
• Gins are not intended for applications involving side
pull on the hoist line or with the lift load in a tagged-
out position
• Load line should be parallel to the gin pole
• When calculating load capacities, allow 10 percent for
friction in rope pulleys
• For example, using two double-sheave blocks,
maximum lift load would be 1,400 lbs.; or, using a
single sheave, maximum lift load would be 900 lbs.
Swivel-Top Chain Gin
• Same application as Transformer Gin, but top eye casting
can be swiveled to bypass secondary lines, when necessary
• Cap is not intended to swivel while under load
• Gin has identical load ratings to gins above
• Features 48” Epoxiglas
®
mast andwith twowheel tighten-
ers and 36” chain units
Catalog No.
C4000440
Weight
37 lb./16.7 kg.
Description
Swivel Top
5" Extended Base Chain Gin
STRAP-TYPE TRANSFORMER GINS
Features & Applications
• Same as Chain-TypeGins, exceptwitha strap-type-ratchet-
action mounting mechanism rather than a chain binder
• With 10,000-lb. rated tensile strength, the 2”-wide poly-
ester strap comes in 44” length to fit most structures
• Wide handle openingon rapid-action ratchet permits easy
operation, even with gloves
• Both models feature 2000-lb. maximum ratings, including
load and fall-line pull
Catalog No.
T4001937
T4001938
Weight
14
1
/
4
lb./6.4 kg.
18
1
/
4
lb./8.2 kg.
Description
Standard-Base Strap Gin
5" Extended-Base Strap Gin
Epoxiglas
®
pole: 3" diameter, 26" length
T4001938
Strap Binder Kit
Catalog No.
T4002007
Weight
4
1
/
2
lb./2 kg.
Description
D-Buckle Strap Binder only
C4000315
5" Base
C4000090
Standard Base
T4001937
C4000440
Swivel Top
5” Base
CHAIN BINDER TYPE TRANSFORMER GINS
Available in a standard-base and extended-base design,
these proven Chain Binder Type Transformers Gins are
versatile tools for hoisting distribution transformers and
apparatus up a structure.
Features & Applications
• Standard base unit is for mounting on clear pole
sections
• 5” extended-base model allows bridge mounting up to
4” x 5” crossarms
• Wheel tightener and 36” chain are part of each unit
• Standard and extended-base models feature 2000-lb.
maximum ratings, including hand pull force
• 900-lb. lift load with single hoist line through a pulley
on the gin and a sheave near the base of structure (lift
load plus pull load equals capacity)
• Lift load can be 1,400 lbs., using 4-4 blocks
• Pole length is 26 inches
Catalog No.
C4000090
C4000315
Weight
15 lb./6.75 kg.
30 lb./9 kg.
Description
Standard Base Chain Gin
5" Extended Base Chain Gin
Safety Considerations
• A swivel-hook block should always be used in the eye of
the gin and a sheave or capstan near the bottom of the
structure should be used to thread handline
• Gins are not intended for applications involving side pull
on the hoist line or with the lift load in a tagged-out posi-
tion
• Load line should be parallel to the gin pole
• When calculating load capacities, allow 10 percent for
friction in rope pulleys
• For example, using two double-sheave blocks, maximum
lift load would be 1,400 lbs.; or, using a single sheave,
maximum lift load would be 900 lbs.
CHAIN-BINDER GINS
STRAP-TYPE GINS