Página 66 - abchance

Versión de HTML Básico

Insulated Hand Tool s – 2100
Page 2106
September 2012
Phone: 573-682-5521 Email: hpsliterature@hubbell.com Web: hubbellpowersystems.com
Features & Applications
• Tested per OSHA & ASTM F711
• Used on or around energized lines for forming, bending and positioning
jumper wires
• Also used for holding conductors during splicing operations
• Gripper, with an eye for extra sticks, will handle No. 6 copper through 1590
kcmil ACSR
Operation
• Grips like locking-type pliers
• By tightening the knurled nut at control lever, wire-holding jaws can firmly
grip conductor
• When doing this, tightening control lever must be in relaxed position about
1” from pole
• To secure conductor grip, push lever down to the pole
• To release conductor, simply move the control lever all the way up along the
rod
• Head of tool locks in three stop positions, allowing lineman to easily position
conductors
• Knurled screw handle below jaw opening adjusts head position from straight
to right to left
With handle positioned as
shown in photo above, the
knurled nut can be turned to
adjust the gripper to the exact
wire size.
Headof the tool locks in three
positions . . . enables lineman
tohandle conductor fromany
angle.
Wire Holding Stick
C4033068
Catalog
No.
HG30302
HG303012
HG30422
HG30425
Pole Dia. &
Overall Length
1
1
4
" x 8'6"
1
1
4
" x 8'6"
Approx.
Weight
4 lb./1.8 kg.
4 lb./1.8 kg.
1 lb./0.45 kg.
1
1
8
lb./0.5 kg.
Type Head
Regular Length
Extra Long
HG30425
Extra long head (above) for use with
long eyescrew ground clamps.
Reg. Length Clampstick Head Only
Extra Long Clampstick Head Only
WIRE-HOLDING STICKS
Conductor Capacity: #6 to 1590 kcmil ACSR (0.162" to 1.5")
For SAFETYSHIELD
Hot Stick Barrier to
fit tools on this page, see page 2129.
Catalog No.
C4033068
C4033069
PSC4030592
T4032992
Pole Dia. & Overall Length
1
1
4
" x 6'5"
1
1
4
" x 8'5"
1
1
4
" x 10'5"
1
1
4
" x 11'2"
Approx. Weight
6
1
2
lb./2.7 kg.
6
3
4
lb./3.0 kg.
7
1
2
lb./3.4 kg.
8
1
4
lb./3.7 kg.
Positive Grip Clampstick
Features & Applications
• Tested per OSHA & ASTM F711
• For use on eyescrew grounding or hot line clamps
• Can be mounted on the line and tightened at up to 30° angles
• Aluminum and bronze fittings
Operation
• Install clamp by aligning locking ring with slot in housing
• Place eye of clamp in housing
• Holding locking ring and clamp in one hand, rotate pole clockwise
to trap eye
• Remove clamp by engaging clamp body locking ring and rotating
pole clockwise to trap eye
• Butt end is equipped with a combination tool hanger and universal
head
Positive Grip
Clamp Stick
HG30302