Página 82 - abchance

Versión de HTML Básico

Insulated Hand Tool s – 2100
Page 2122
September 2012
Phone: 573-682-5521 Email: hpsliterature@hubbell.com Web: hubbellpowersystems.com
Clear Vision
Mirror
Angle adjustment enables the
operator to inspect insulators,
switch bases, and other
equipment which is difficult to
see without coming in contact
with energized conductors.
Part No. M445538............ 14 oz.
Shepherd Hook
The self-aligning shepherd
hook is designed for pulling
and lifting insulator strings.
Swivel action permits it
to rotate and maintain its
alignment with the insulator
at all times. Heat treated
aluminum alloy.
Part No. M445539...........14 oz.
Fixed Blade Tie
Stick Head
For manipulating tie wires with or
without looped ends. The sharp
V-notched blade gets into tight
places to pry tie wires loose. The
head is set at 60° angle from the
pole when attached, for ease in
operation.
Part No. M445540................... 8 oz.
Flexible Wrench Head
1
2
"-square drive
Made to fit standard wrench
sockets. Flexibility permits use at
various angles.
Part No. M445546............... 1 lb.
Skinning Knife
For cutting or scraping insulation,
cleaning conductors, etc., prior
to making splices. Its use with a
universal pole permits work near
energized lines with safety.
Part No. M445550........... 7
1
2
oz.
Conductor Cleaning
Brush
V-position of brushes gives
2-sided cleaning action. As
brushes wear, they can be
rotated, by loosening the anchor
screws, so that unused bristles will
come in contact with conductor.
Part No. M445563................. 11 oz.
Part No. M1889 With Hand Grip
............................................... 16 oz.
Part No. M1899 Box of 10
Replacement Brushes..............5 lb.
Storm Tool
A universal pole extension with rubber
insulator skirts. Splined fitting at top of tool
receives other universal tools. Overall length
19
1
2
".
Part No. H445564........................... 1
1
4
lb.
Universal Tool Accessories
––– See Universal Tool KITS on Page 2119 –––
4.25"
Rotary Prong
Tie Stick Head
For placing insulator ties with
looped ends. Head treated
aluminum alloy body. Prong swivels
freely, permitting a full turn on the tie wire
without releasing contact. This minimizes
the possibility of kinking or burning the
wires.
Part No. M445569................... 6 oz.
Pistol Grip Saw Handle
Developed for use with a pruning
saw when limbs are convenient and
insulation is not needed. Aluminum
alloy.
Part No. M445566................... 8 oz.
Adjustable Insulator Forks
Designed to grasp 9" and 10"
disk insulators used in deadend
construction,will raise most pin
type insulators up to 15 lb. Fiber
jaws open and close by rotating
screw.
Part No. M445567
Jaws adjust from 3" to 4
1
4
" across
inside center of fork.....
1 lb. 11 oz.
No. T4031101
For polymer insulators, jaws
adjust from 2
1
4
" to 3
1
2
".
1 lb. 6 oz.