Página 85 - abchance

Versión de HTML Básico

Insulated Hand Tool s – 2100
Phone: 573-682-5521 Email: hpsliterature@hubbell.com Web: hubbellpowersystems.com
Page 2125
September 2012
Cotter Key Holder
Used to install cotter keys into semi-
recessed hardware such as found on EHV,
this tool will hold the keys in position for
proper insertion into clevis pins. The tool
will hold the key firmly, yet readily release
once engagement is made
Part No. M4455103..................1 lb.
Hot Rodder Tool
Ideal for applying line ties and
other formed wire products on
energized lines. The smaller
unit (C4031071) is particularly
adaptable to Super Top-Ties
®
.
The loop type work end permits
rotational control which is
difficult with conventional tying
tools.
Weight
12 oz.
13 oz.
Dim. B.
1
3
4
"
3"
Dim. A.
17
32
"
11
16
"
Part No.
C4031071
C4030834
All-Angle Pliers
Designed to grasp from any
angle, and tighten by clockwise
rotation of the Universal Tool
handle. The jaws are held firmly
in position with a wing-nut. Used
as a holding device for retaining
bolt heads and loose hardware,
adjusting arcing horns, replacing
cotter keys, etc.
Part No. C4030177........... 1
1
2
lb.
Plastic Insulator Tool
Plastic coating of the Chance Ball
and Socket Adjuster prevents
damage to Epoxilator distribution
deadend insulators during lifting or
rotating of the insulator. Arms of the
tool are designed to fit between the
skirts of the insulator.
Part No. C4030175...........12 oz.
Ball Socket
Adjuster
Similar to the M445587 Chance
Ball socket Adjuster, this Adjuster is
designed to handle socket adapters
up to 2
3
4
inches wide.
Part No. C4030126................ 14 oz.
Knocker
Designed to knock out and pull the
cotter keys on fog-type insulators,
the Knocker Tool is spring assisted
for greater impact in restricted
space and under adverse working
conditions. The Knocker has a
standard universal fitting one end
and a Universal fitting one end and
a Universal fitting with wingnut
on the other end to receive various
Cotter Key Tools at top of this page.
Part No. C4030011................ 10 oz.
Cotter Key Tool
The Cotter Key Tool is a companion
tool to Part No. C4030005, both
designed for ball and socket type
insulator couplings. C4030005
enters the socket opening to force
the cotter key out while C4030006,
shown here, forces the key back
into position. Effectiveness of both
tools is enhanced with the use of the
Universal Knocker.
Part No. C4030006................1
1
4
lb.
Cotter Key Tool
Used for ball and socket insulator
couplings, this tool is used to push
the cotter key into position where
great force is required.
Part No. C4030005................1
1
4
lb.
Universal Tool Accessories
––– See Universal Tool KITS on Page 2119 –––
B
A
3.1"
2.3"
2.9"
3.1"
1.25"
1.9"