Página 93 - abchance

Versión de HTML Básico

Cut ters – 2150
Phone: 573-682-5521 Email: hpsliterature@hubbell.com Web: hubbellpowersystems.com
Page 2151
September 2012
Insulated
Hand Tools
Warranty - Material
Hubbell Power Systems, Inc. warrants all products sold by it to be merchantable (as such term is defined in the Uniform Commercial Code) and to be free from defects in material and work-
manship. Buyer must notify the Company promptly of any claim under this warranty. The Buyer's exclusive remedy for breach of this warranty shall be the repair or replacement, F.O.B. factory,
at the Company's option, of any product defective under the warranty which is returned to the Company within one year from the date of shipment. NO OTHER WARRANTY, WHETHER
EXPRESS OR ARISING BY OPERATION OF LAW, COURSE OF DEALING, USAGE OF TRADE OR OTHERWISE IMPLIED, SHALL EXIST IN CONNECTION WITH THE COMPANY'S PRODUCTS OR ANY
SALE OR USE THEREOF. The Company shall in no event be liable for any loss of profits or any consequential or special damages incurred by Buyer. The Company's warranty shall run only
to the first Buyer of a product from the Company, from the Company's distributor, or from an original equipment manufacturer reselling the Company's product, and is non-assignable and
non-transferable and shall be of no force and effect if asserted by any person other than such first Buyer. This warranty applies only to the use of the product as intended by Seller and does
not cover any misapplication or misuse of said product.
Warranty - Application
Hubbell Power Systems, Inc. does not warrant the accuracy of and results from product or system performance recommendations resulting from any engineering analysis or study. This applies
regardless of whether a charge is made for the recommendation, or if it is provided free of charge.
Responsibility for selection of the proper product or application rests solely with the purchaser. In the event of errors or inaccuracies determined to be caused by Hubbell Power Systems, Inc.,
its liability will be limited to the re-performance of any such analysis or study.
0.05
to 1.0
1.1
to 15.0
15.1
to 36.0
36.1
to 46.0
46.1
to 72.5
72.6
to 121
138
to 145
161
to 169
230
to 242
345
to 362
500
to 550
765
to 800
(ft.-in.)
(m)
Nominal Voltage
in Kilovolts
Phase-to-Phase
Phase-to-ground
exposure
Distance
Phase-to-phase
exposure
(ft.-in.)
(m)
*
2-1
2-4
2-7
3-0
3-2
3-7
4-0
5-3
8-6
11-3
14-11
*
0.64
0.72
0.77
0.90
0.95
1.09
1.22
1.59
2.59
3.42
4.53
*
2-2
2-7
2-10
3-6
4-3
4-11
5-8
7-6
12-6
18-1
26-0
*
0.66
0.77
0.85
1.05
1.29
1.50
1.71
2.27
3.80
5.50
7.91
Live-Line Work Minimum Approach Distances
• Distances agree with
OSHA guidelines in Table
R-6 of the Federal Register,
published 1/31/94. These
distances take into consider-
ation the highest switching
surge an employee will be
exposed to on any system
with air as the insulating
medium and the maximum
voltages shown.
• The clear live-line tool dis-
tance shall equal or exceed
the values for the indicated
voltage ranges.
*Avoid contact.
Section
2100
©
Copyright 2011 Hubbell Incorporated  •  210 North Allen Street  •  Centralia, MO 65240 USA
www.hubbellpowersystems.com
E-mail: hpsliterature@hubbell.com
NOTE: Because Hubbell has a policy of continuous product improvement, we reserve the right to change design and specifications without notice.
Printed in USA
NOTICE: For latest revision of our Catalog and Literature, please visit our web site:
www.hubbellpowersystems.com
t s –
Cutters
Catalog 2150 September 2012