Página 442 - BURNDY

Versión de HTML Básico

US: 1-800-346-4175
www.burndy.com
Canada: 1-800-387-6487
Blue highlighted items are industry standard and most frequently ordered.
BURNDY
®
Overhead
H-65
DEADEND FITTINGS
AND ACCESSORIES
The deadend method selected for any partic-
ular application will depend upon the nature
of the application, the size of the conductor,
holding strength required, and preference for
mechanical or compression devices.
Secondaries are commonly deadended by
bending wire around a spool insulator and
snubbing with the same connectors used for
the secondary to service drop connection.
On copper conductor, connectors such as U-
bolt Clip BC, SERVIT™ KS, OKLIP™ KVS or
CRIMPIT™ YC-C are recommended. These
connectors provide high holding strength
without damaging conductor strands. On
aluminum wires, CLIPIT™ UW-R, mechani-
cal connector is recommended.
The same methods can also be used on
primaries. However, the straight line clamp
Type CUW-A-E is more popular for this appli-
cation. They are easier to install on either hot
or de-energized lines. They are particularly
well suited to hot-line maintenance, and
allow easy re-sagging of conductors.
Straight line types are also popular for dead-
ending strain buses. These are normally
large, hard to handle conductors that do not
lend themselves to snub or “quadrant” types.
Types DUW or CUW-E are recommended for
copper conductor and DUW-A and DUW-A-
E for aluminum and ACSR. The pulling eye
on the DUW-A-E is in line with the cable to
make installation easier.
TYPE UP-R
HEAVY DUTY
PARALLEL CLAMP
For All Combinations of Copper,
Aluminum†, ACSR†, 6201 and
5005
Heavy duty aluminum connector for feeder,
subtransmission and primary distribution.
Massive design and large spacer give maxi-
mum protection against galvanic action and
overload conditions. Spacing of U-bolts,
tapered bell mouths and modified V groove
minimize cold flow, eliminate cable damage,
and produce wiping action on conductors.
Spacer taps confine cable strands to prevent
splaying. Captured, heat treated aluminum
alloy U-bolts. PENETROX™ joint compound
recommended for all combinations.
† Accommodates compact and compressed conductors
within diameter range.
Catalog
Groove A
Groove B
Dimensions
Number
ACSR †, 6201, 5055 Copper or Aluminum† ACSR †, 6201, 5005 Copper or Aluminum† H J
L
W
UP34R
110.8 (12-7) - 397.5 (18-1)
3/0 Str. - 400
110.8 (12.7) - 397.5 (18-1)
3/0 Str. - 400
4-5/8 1/2-13 4
2-5/8
UP45R36R
336.4 (30-7) - 795 (30-19)
397.5 - 954
110.8 (12-7) - 447 (18-1)
3/0 Str. - 500
5-1/4 1/2-13 4
2-7/8
UP45R
336.4 (30-7) - 795 (30-19)
397.5 - 954
336.4 (30-7) - 795 (30-19)
397.5 - 954
6-1/4 5/8-11 4-1/2 3-1/4
RUS Accepted