Página 708 - BURNDY

Versión de HTML Básico

MD6-8
HYTOOL™
Hand-Operated Tool
Installs full range of connectors (taps,
splices, terminals): #14 through 4/0.
Applications: Full Tension and Non-Tension.
The MD6-8 has a five (5) year warranty and is
designed to provide over 90,000 reliable
crimps installing full-tension and non-tension
connectors.
The MD6-8 installs almost all of the line, pole
and house connections in the Burndy
Compression Connector Program with only
one (1) extra die set (W-BG). The tool has two
(2) permanent die grooves, “O” and “D
3
” for
distribution tap connectors. The “D
3
” groove
also serves as a seat for die inserts to install
additional splices, taps and terminal connec-
tors. The die inserts snap into the D
3
groove
easily with one hand and lock securely in the
tool with the spring loaded positive lock die
retainer buttons.
The MD6-K accepts KEARNEY™ type “O”
dies and BURNDY
®
“W” and “X” dies with
the KWADP adapter.
KEARNEY™ is a registered trademark of
COOPER TECHNOLOGIES COMPANY.
SPECIFICATIONS
Crimp Force: 9,000 lbs.
Length: 25-3/8
Weight: 6 lbs.
Quality Unsurpassed!
Life cycle tested under full operating forces
for over 90,000 cycles successfully without
adjustment or any parts replacement.
FOR USE ON
• Copper, Aluminum, ACSR, Copperweld,
Alumoweld, Steel, 6201, 5005,
Compressed and compact conductors.
• Copper Taps: #10 sol.-2/0 str.
• Aluminum, ACSR Taps: #14 sol.-4/0 ACSR
• Stirrups: #6 ACSR-4/0 ACSR
• Overhead Full Tension Deadend, Full
Tension Splices, Non Tension Splices,
and Terminals Conductor Range:
#10 str.-4/0 ACSR.
• Code conductor connectors: #6-4/0 str.
Copper and Aluminum
To Check Tool Adjustment
Simply close the tool handles until the jaws
initially butt. When the orange alignment
grooves are in line, the tool is in correct
adjustment.
BENEFITS
• Proper crimps are assured with butting
steel jaws.
• No additional dies required for “O” and
“D
3
” size tap connectors.
• Increased strength and greater bearing
area is provided with larger steel bolts.
• Fast, easy, one-hand die insertion.
• No lost dies with spring loaded positive
lock die retainer buttons.
• Easy visual field check for proper tool
adjustment with orange alignment
guide lines.
• Over 90,000 crimps provided with
Teflon impregnated steel backed
bronze bushings.
• Full crimp force assured with over center
cam action.
• Easy tool adjustment with allen wrench.
• Operator protection provided with butt
stops and heat shrink tubing.
• Long life expectancy provided with select
clear hickory handles and lightweight high
strength aluminum alloy castings.
• Easier tool operation is provided with bent
handles and anti-slip grips.
• The “D
3
” groove accommodates the
complete line of type “W-” die inserts.
• 5-year limited warranty.
Features
HIGH STRENGTH
FORGED STEEL
JAWS
SPRING LOADED
POSITIVE LOCK
DIE RETAINER
BUTTONS
PTFE*
IMPREGNATED
STEEL BACKED
BRONZE
BUSHINGS
ORANGE
ALIGNMENT
GROOVES
PROVIDE
VISUAL CHECK
FOR TOOL
ADJUSTMENT
HIGH STRENGTH
CAST ALUMINUM
ANTI-SLIP
HANDLE
GRIPS
BENT
HANDLES
PROVIDE
EASIER TOOL
OPERATION
HANDLE
BUTT
STOPS
HIGH QUALITY
CLEAR HICKORY
HANDLES
HEAT SHRINK
TUBING
ADJUSTMENT
LOCKING
SCREW
ADJUSTMENT
SCREW
OVER CENTER
CAM ACTION
LARGE
DIAMETER
HARDENED STEEL
BOLTS
PERMANENT “D
3
DIE GROOVE
PERMANENT “O”
DIE GROOVE
JAWS BUTT
EASY DIE INSERTION/REMOVAL
MD6 Tool Variations
MD6
Standard MD6 with permanent
“BG” (5/8 ) and “D
3
” grooves.
Installs CABLELOK CRIMPIT and
HYCRIMP™ Tap Connectors with
one additional die insert (W-O). All
other tool features and connector
ranges are the same as the MD6-8
described above.
MD6-4
Standard MD6 with permanent
“BG” (5/8 ) and “D
3
” grooves and
straight fiberglass handles 24”
long. Fiberglass rated at 100 kV
per foot for 5 minutes.
MD6-14
Standard MD6 with permanent
“BG” (5/8 ) and “D
3
” grooves and
straight fiberglass handles 19 long
including bent aluminum grips.
Fiberglass rated at 100 kV per foot
for 5 minutes.
MD6-12
Standard MD6-8 jaws with perma-
nent “O” and “D
3
” grooves and
straight fiberglass handles 24”
long. Fiberglass rated at 100 kV
per foot for 5 minutes.
MD6-6
“Snub-Nose” variation of MD6 has
a permanent “D
3
” groove in jaw.
Recommended for use where
space for tool jaw is limited.
MD6-37
Permanent 161, 162, 163, 171
dies in the jaw (J, M&P, T & X).
MD6-38
Permanent K, BG, C, dies in
the jaw.
MD6-K
“Snub-Nose” permanent
KEARNEY™ groove.
N-19
Blue highlighted items are industry standard and most frequently ordered.
US: 1-800-346-4175
www.burndy.com
Canada: 1-800-387-6487
BURNDY
®
Tooling
Crimpers—Mechanical and Ratchet