Página 758 - BURNDY

Versión de HTML Básico

EPAC10, EPAC8, AND
EPAC6
EPAC Series
Electric/Hydraulic Pump,
Air Control
Hydraulic Output Pressures
of 10,000 PSI, 8,800 PSI, and
6,000 PSI
The EPAC10, EPAC8, and EPAC6 electrically
driven hydraulic pumps feature exclusive
automatic or manual “jog and hold” opera-
tion control provided by a unique air control
switch, which provides the safest operation
method of any pump available. All EPAC’s
are remotely controlled by an improved air
control switch which electrically isolates the
operator from the unit, and can be operated
by either hand or foot activation. A three (3)
position toggle switch mounted on the con-
trol box allows the operator to select either
full automatic, off, or manual operation.
The automatic mode advances the remote
tool into a “hold” position without crimping
the connector so the operator can inspect
the orientation before completing the crimp.
Once the crimp is completed, the pump
automatically turns the pump off, allowing
the retraction of the remote tool and resets
itself for the next operation.
The manual position allows the operator to
jog the tool forward without the tool ram
retracting. To retract the tool prior to com-
pleting the crimp, turn the control switch to
“off,” the pump will stop and the tool will
retract. In the manual mode the pump
advances only while the control is being
depressed. To complete a crimp, squeeze
and hold the air control switch until the pump
reaches the pre-set pressure and shuts off.
The EPAC Series of electrically driven
hydraulic pumps incorporate a heavy-duty
roll cage design that is both rugged and
portable. All EPAC Series pumps have been
life cycle tested to over 100,000 cycles with-
out failure, and are warranted to be free of
defects in material and workmanship for five
(5) years when properly maintained and
operated.
SPECIFICATIONS
Motor:
1/2 HP 115/230 V-AC,
60 Cycle
Maximum current
draw:
10 amperes
Reservoir volume:
8 quarts max.,
2 quarts min.
Height:
17-1/2
Base:
11-3/4 18-1/2
Dry weight:
68 lbs.
(82 lbs. w/max. fluid)
(1/2 Hp @ 3450 RPM)
FOR USE ON
EPAC10
10,000 Y34BH, Y35BH,
EPAC-8
8,800 Y48BH
EPAC-6
6,000 Y35L
FEATURES
• Roll cage
• 3 position switch and control box
• Factory set output pressure
• Quick disconnect hydraulic coupler
• Oil level window
• 8 quart reservoir
BENEFITS
• Permits final inspection of connector
before completing crimp cycle.
• Extra supply hydraulic fluid 8-quart
reservoir.
• Full automatic or manual “Jog and
Hold” cycles.
• Operator safety with power loss “smart
circuit,” freezes unit in event of power
disruption.
• Method of operation desired is permitted
with 3-position selection switch.
• Safety is provided against hazardous
shock with airbulb actuator and air line.
• Saves time with quick disconnect
hydraulic fitting.
• Windows allows easy inspection of
proper oil level.
• High quality crimps are achieved with
built-in factory set pressure release valve.
• 5-year limited warranty.
N-69
Blue highlighted items are industry standard and most frequently ordered.
US: 1-800-346-4175
www.burndy.com
Canada: 1-800-387-6487
BURNDY
®
Tooling
Hydraulic Pumps