Página 759 - BURNDY

Versión de HTML Básico

EP10, EP10-2, EP8,
AND EP6
EP SERIES ELECTRIC/
HYDRAULIC PUMPS
Hydraulic Output Pressures
of 10,000 PSI, 8,800 PSI,
and 6,000 PSI
Electrically driven hydraulic pumps are
supplied with a durable, hand-held electric
pendent switch that remotely controls the
pump and matches the output requirements
of all HYPRESS™ remote heads and cutters.
Each pump is equipped with a built-in,
factory set, pressure relief valve. An audible
“pop” and recycling of the pump and relaxing
of the hose, signals completion of the crimp-
ing/cutting cycle.
All EP series pumps are supplied with 115/230
- 220/230 voltage, 60/50 hertz, 1/2 horse-
power motor and can be wired for use with
any electric power source worldwide. A three
prong, grounded plug is wired standard on the
units. All EP Series pumps have been life cycle
tested to over 100,000 cycles without failure,
and are warranted to be free of defects in
materials and workmanship for five (5) years
when properly maintained and operated.
OIL LEVEL WINDOW
1/2 HP MOTOR
DUAL VOLTAGE/HERTZ
QUICK DISCONNECT
HYDRAULIC COUPLER
8 QUART
RESERVOIR
FACTORY SET
OUTPUT
PRESSURE
ROLL CAGE
SPECIFICATIONS
Motor:
1/2 HP 115/230 V-AC,
60 cycle
(EP**-2 versions): 1/2 HP 220/230 V-AC,
50 cycle
Maximum current
draw:
10 amperes
Reservoir volume:
8 quarts max.,
2 quarts min.
Height:
17-1/2
Base:
11-3/4 18-1/2
Dry weight:
68 lbs. (86 lbs. with
max. fluid)
(1/2 Hp @ 3450 RPM)
FOR USE ON
EP10
10,000 Y34BH, Y35BH, Y35BH-4,
EP10-2
Y39BH, Y45, Y46, Y46-C,
Y60BHU, Y750BH,
Y750BH-2, RHCC Series
Cutters
EP8
8,800 Y48BH
EP6
6,000 Y35L
FEATURES
BENEFITS
• Provides fast sure pump action plus a
long life expectancy.
• It’s portable. Roll cage allows easy moving
on the job site.
• Durable 1/2 HP dual voltage motor.
• Extra supply of hydraulic fluid with
8 quart reservoir.
• Saves time with quick-disconnect
hydraulic fitting.
• Easy operator control is provided with
remote pendent switch.
• Easy inspection of proper oil level is
provided by see through window.
• High quality crimps are achieved with
built-in, factory set, pressure release
valve and audible recycling of pump
which signals completion of crimp.
• 5-year limited warranty.
N-70
Blue highlighted items are industry standard and most frequently ordered.
Canada: 1-800-387-6487
www.burndy.com
US: 1-800-346-4175
Tooling
BURNDY
®
Hydraulic Pumps