Página 766 - BURNDY

Versión de HTML Básico

BURNDY
®
Tooling
Low Pressure Hydraulic
US: 1-800-346-4175
www.burndy.com
Canada: 1-800-387-6487
Blue highlighted items are industry standard and most frequently ordered.
N-77
KOMPRESSOR™
LPHY750XT AND
LPHY750CXT
Remote Operated 12 Ton
Low Pressure Hydraulic
Compression Tool
The BURNDY
®
LPHY750XT KOMPRES-
SOR™ is a lightweight, compact, low pres-
sure, hydraulic 12 ton crimping tool. The
LPHY750XT is double acting for hydraulic
ram advance and retract. The KOMPRES-
SOR™ also has an industry exclusive spring
back up for ram retraction in case of loss of
hydraulic pressure. The LPHY750XT comes
equipped with an ergonomic handle
designed for better balance, which helps
lessen fatigue to the operator.
The LPHY750XT KOMPRESSOR™ features
the BURNDY
®
750XT tool head with a 1.65
jaw opening capable of using all industry stan-
dard BURNDY
®
“U” dies. The LPHY750XT
also has an industry exclusive visual crimp
indicator to assure the operator of a properly
completed crimp. The LPHY750XT also has
an audible crimp indicator.
The LPHY750XT is powered directly from
open center or closed center hydraulic tool
circuits present on most utility line trucks or
can be operated from individual low-pres-
sure hydraulic power units. The LPHY750XT
can be switched from open center to closed
center operation with a simple external
adjustment. The LPHY750XT does not
require any additional tooling such as boost-
ers, intensifiers, or hand controls in the
bucket. Five-year limited warranty.
SPECIFICATIONS
Flow Rate:
3 - 9 GPM
(11 - 34 LPM)
Operating Pressure:
1,500 - 2,500 psi
(103 - 172 BAR)
Force Developed:
12 Tons
Weight:
21 lbs. (9.5 kg)
Overall Length:
20.65 in. (524 mm)
Width:
15 in. (381 mm)
Jaw Opening:
1.65 in. (42 mm)
Max. Back Pressure:
250 psi (17 BAR)
Crimp Time:
Approximately
2 seconds
FOR USE ON
Tension Sleeves
Copper
#8 sol - 500 kcmil
Aluminum
#8 sol - 587.2 kcmil
ACSR
#4 - 556.5 kcmil
Taps
Copper
#14 sol - 500 kcmil
Aluminum
#8 sol - 500 kcmil
Aerial Cable
Copper
#6 - 500 kcmil
Terminals and Splices
Copper
#8 - 750 kcmil
Aluminum
#8 - 750 kcmil
ACSR
#4 - 556.5 kcmil
HYGROUND
®
Copper
#8 - 500 kcmil
Ground Rods
1/2 - 1 diameter
ACCESSORIES
Hoses:
Cat No.
LPHTHOSNCR66668OP
Direct connect 8 non-conductive hose set
Cat No.
LPHTHOSNCR666610OP
Direct connect 10 non-conductive hose set
*Cat No.
LPHTHOSNCR66668
8 non-conductive hose set
*Cat No.
LPHTHOSNCR666610
10 non-conductive hose set
Hydraulic Fittings:
Cat No.
LPHTHTMANOSE66
Male coupler 3/8 HTMA
Cat No.
LPHTHTMABODY66
Female coupler 3/8 HTMA
Cat No.
LPHTADPSMFOP66
Swivel Adapter
*These hoses are used with the
LPHTADPSMFOP66 swivel adapter.
FEATURES
• LPHY750CXT covered version available.
(See picture below.)
• Visual and audible crimp indicator assures
properly completed crimps with 12 tons of
force.
• Covers a wide range of applications with
its 1.65 jaw opening.
• 350 head rotation for versatile tool head
positioning allowing the user to get into
tight areas easier.
• Uses all standard BURNDY
®
“U” dies.
• Operates on open center or closed center
hydraulic systems.
• Ergonomic handle design for better
balance and helps lessen fatigue.
• Double acting tool for hydraulic ram
advance and retraction.
• Spring back up for ram retraction if
hydraulic system shuts down.
• 5-year limited warranty.
Visual Crimp
Indicator
Ergonomically Balanced Tool
and Handle Design
Internal Ram Retraction
Backup Spring
Covered Head
Large 1.65 Jaw
Opening
Activation Trigger
LPHY750CXT Covered Model Shown
Covered Body
and Handle