Página 57 - elastimold

Versión de HTML Básico

CABLE ACCESSORIES
Bushing nterface
Voltage
nterface
Standard o.
Class
Description
igure o.
200 AMP DEEPWELL
15kV, 25kV 200 AMP Bushing
IEEE
EQUIPMENT BUSHING
and 35kV
Well Interface
386-2001
8.3kV, 15.2kV,
Fig. 3
21.1kV
200 AMP LOADBREAK INSERT
15kV
200 AMP Loadbreak
IEEE
8.3kV and
386-2001
8.3kV/14.4kV
Fig. 5
200 AMP LOADBREAK INSERT
25kV
200 AMP Loadbreak
IEEE
15.2kV and
386-2001
15.2kV/26.3kV
Fig. 7, Note 1
200 AMP LOADBREAK INSERT
35kV
200 AMP Loadbreak
IEEE
Interface No. 2
386-2001
21.1kV and
Fig. 7, Note 1
21.1kV/36.6kV
200 AMP DEADBREAK INSERT 15kV and 25kV 200 AMP Deadbreak
IEEE
8.3kV and 15.2kV
386-2001
Fig. 4
600 SERIES EQUIPMENT BUSHING 15kV and 25kV 600 AMP Deadbreak
IEEE
Interface No.1
386-2001
8.3kV and 15.2kV
Fig.11
600 SERIES EQUIPMENT BUSHING 35kV
600 AMP Deadbreak
IEEE
Interface No.1
386-2001
21.1kV
Fig.13
A
ANSI/IEEE Standard 386 defines the specific in-
terface dimensions that 200 Amp and 600 Series
elbows, inserts, junctions, equipment bushings and
any mating components must conform to insure
interchangeability. The table below provides infor-
mation concerning the types of interfaces supplied
by Elastimold for various applications and
is useful to assure proper matching of components.
NOTES:
1. Elastimold uses Fig. 7 interface for both 25 and 35kV applications.
Standard nterfaces for Separable Connectors,
Components and Equipment Bushings
C
D
E
G
B
C
D
E
G
A
B
Separable
Connector nterfaces
Standard Interfaces