Página 67 - elastimold

Versión de HTML Básico

Separable Connectors
600 Series Deadbreak
CABLE ACCESSORIES
llustration Description Voltage ELAST LD otes
(not to scale)
Class Part umber
2-Point Junction 15/25kV
K650J2
N1,9,10
35kV
750J2
N1,9,10
3-Point Junction 15/25kV
K650J3
N1,9,10
35kV
750J3
N1,9,10
4-Point Junction 15/25kV
K650J
N1,9,10
35kV
750J
N1,9,10
1-way
15/25kV
K655L
N1,2,3,4
L-Kit
35kV
755L
N1,2,3,4
2-way
15/25kV
K655L2
N1,2,3,4,5,6,7
L-Kit
35kV
755L2
N1,2,3,4,5,6,7
2-way
15/25kV
K655VSL2
N1,2,3
VS-Kit
35kV
755VSL2
N1,2,3
3-way
15/25kV
K655L3
N1,2,3,4,5
L-Kit
35kV
755L3
N1,2,3,4,5
3-Way
15/25kV
K655VSL3
N1,2,3,5,6,7
VS Kit
35kV
755VSL3
N1,2,3,5,6,7
4-Way
15/25kV
K655L
N1,2,3,4,5
L-Kit
35kV
755L
N1,2,3,4,5
4-Way
15/25kV
K655VSL
N1,2,3,5
VS-Kit
35kV
755VSL
N1,2,3,5
Assembly Tool
ALL
600AT
N8
(Window-Op)
Spanner Wrench ALL
600SW
N2
N1. For 900 Amp ratings, substitute 675 for 650 and 655; 676 for 656;
K675 for K650 and K655; K676 for K656; 775 for 750 and 755;
776 for 756 and 2X for 0X in the part number. The 900 Amp rating
requires copper current-carrying connector components and copper
conductor cable.
N2. 600SW spanner wrench is recommended for installation of K650CP
connecting plug, deadbreak reducing tap plugs and reducing tap
wells.
N3. L-Kits and VS-Kits do not include cable adapters or compression
lugs. These items must be ordered separately.
N4. 600 Series Elbows and Straight Receptacles with IEEE Std. 386
capacitive test points are available by substituting 656 for 655;
K656 for K655; K676 for K675; 756 for 755; 676 for 675; K676 for
K675 and 776 for 775 in the part number.
N5. 600ATM is recommended for installing K651CP and 750CP.
N6. Can be used as a repair joint. (Gains 3-1/2” of repair length)
N7. Can be used as a reducing joint for different size cables.
N8. See page 17 for Window-Op Connector Kit.
N9. Rubber junction with stainless steel mounting plate and back plate.
Add “-U” for rubber junction with stainless steel mounting plate,
back plate and adjustable mounting bracket.
Add “-4” for rubber junction only.
Add “-5” for rubber junction, stainless steel U-straps and back plate.
N10. Two - six-position multi-point junctions shown on pages 20 and 21.
VAULT ST ETCHE
Provides an alternate method of splicing and joining
various types and styles of cables using standard
600 Series components.
600 Series Deadbreak
Refer to the
W
and
X
tables on pages 38 and 39 for sizing to cable
insulation diameter and conductor size.
For cable shield adapters and jacket seals, see page 28.